Projector brightness calculator
A lumen figure on its own says little: the same projector looks bright on a 100-inch screen and dim on a 150-inch one. This calculator turns your screen size, screen gain and the brightness you want on the screen into the lumens the projector has to deliver in the picture mode you will actually use.
Results are estimates for planning. Check the manufacturer's manual before you drill, buy or mount anything.
How it works
Screen brightness in foot-lamberts (fL) is the light falling on each square foot of screen multiplied by the screen gain:
fL = lumens × gain / screen area (ft²) ⇒ lumens = fL × area / gain
The screen area comes from the diagonal and aspect ratio: width = diagonal × a / √(a² + 1), height = width / a. One foot-lambert is 3.426 cd/m² (nits).
The default target, 16 fL, is the open-gate luminance in the SMPTE cinema screen standard (SMPTE 196M). It is a dark-room figure: rooms with light-colored walls or some ambient light need more.
Assumptions and limits
- Manufacturers rate lumens in the brightest mode. Accurate picture modes often deliver less; enter that share if the projector's review or manual states it.
- Gain is measured on the screen's center axis. High-gain screens get dimmer for seats off that axis.
- Lamp-based projectors lose brightness with age; laser models lose it more slowly.
Sources
- Foot-lambert (Wikipedia): definition and conversion to cd/m²
- SMPTE 196M, Indoor Theater and Review Room Projection: Screen Luminance and Viewing Conditions
Last reviewed: November 2026.